IndustrialPCI (IPCI)

PCI=Peripheral Component Interconnect.
IndustrialPCI is a version of PCI adapted for industrial and/or embedded applications.

The IPCI connector has three parts:

Optional 60 pin PCI 64 bit extension (Top)
Mandatory 120 pin PCI 32 bit (Middle)
Optional 60 pin Custom I/O (Bottom)

UNKNOWN (At the backplane)
UNKNOWN (At the device (card))

UNKNOWN CONNECTOR at the backplane.
UNKNOWN CONNECTOR at the device (card).

System Slot (Middle)

Pin	Name	Description	Note
A1	+3,3V	+3.3 VDC
A2	AD2	Address 2
A3	AD6	Address 6
A4	GND	Ground
A5	AD10	Address 10
A6	AD13	Address 13
A7	GND	Ground
A8	SDONE	Snoop Done	1
A9	GND	Ground
A10	FRAME#	Indicate Address or Data phase	1
A11	AD18	Address 18
A12	GND	Ground
A13	+5V	+5 VDC
A14	AD24	Address 24
A15	AD27	Address 27
A16	GND	Ground
A17	REQ2	Request 2	1
A18	GND	Ground
A19	CLK1	33 or 66 MHz Clock
A20	CLK2
A21	GND	Ground
A22	CLK3
A23	CLK4
A24	+3,3V	+3.3 VDC
B1	REQ64#	Request 64 ???	1
B2	AD3	Address 3
B3	+5V	+5 VDC
B4	AD8	Address 8
B5	+3,3V	+3.3 VDC
B6	AD14	Address 14
B7	PAR	Parity
B8	+3,3V	+3.3 VDC
B9	STOP#	Stop	1
B10	C/BE2#	Command, Byte Enable 2
B11	V(I/O)	+3.3 or +5 VDC
B12	AD21	Address 21
B13	+3,3V	+3.3 VDC
B14	V(I/O)	+3.3 or +5 VDC
B15	AD28	Address 28
B16	AD31	Address 31
B17	+3,3V	+3.3 VDC
B18	GNT3	Grant 3
B19	RST#	Reset
B20	NMI#	Non Maskable Interrupt
B21	X6	Reserved (6)
B22	+5V	+5 VDC	:
B23	RSTIN#		2
B24	USB+	Universal Serial Bus (USB)(+)
C1	ACK64#	Acknowledge 64 ???	1
C2	GND	Ground
C3	AD7	Address 7
C4	AD9	Address 9
C5	AD11	Address 11
C6	GND	Ground
C7	SERR#	System Error	1
C8	PERR#	Parity Error	1
C9	DEVSEL#	Device Select	1
C10	GND	Ground
C11	AD19	Address 19
C12	AD22	Address 22
C13	GND	Ground
C14	AD25	Address 25
C15	GND	Ground
C16	X1	Reserved (1)
C17	GNT2	Grant 2
C18	REQ4	Request 4	1
C19	SLEEP#/SDAT	Sleep/Serial Data (I2C)	3
C20	X4	Reserved (4)
C21	INTD#	Interrupt D	1
C22	INTB#	Interrupt B	1
C23	+5V	+5 VDC
C24	USB-	Universal Serial Bus (USB)(-)
D1	AD0	Address 0
D2	AD4	Address 4
D3	C/BE0#	Command, Byte Enable 0
D4	+3,3V	+3.3 VDC
D5	AD12	Address 12
D6	AD15	Address 15
D7	V(I/O)	+3.3 or +5 VDC
D8	LOCK#	Resource Lock	1
D9	TRDY#	Test Logic Ready	1
D10	AD16	Address 16
D11	AD20	Address 20
D12	+5V	+5 VDC
D13	+5V	+5 VDC
D14	AD26	Address 26
D15	AD29	Address 29
D16	REQ1	Request 1	1
D17	REQ3	Request 3	1
D18	V(I/O)	+3.3 or +5 VDC
D19	X2	Reserved (2)
D20	X5	Reserved (5)
D21	+3,3V	+3.3 VDC
D22	INTA#	Interrupt A	1
D23	ICPEN#/SCLK	ICPEN/Serial Clock (I2C)	3
D24	OSC (PWDN)
E1	AD1	Address 1
E2	AD5	Address 5
E3	GND	Ground
E4	M66EN	Enable 66Mhz PCI-bus
E5	GND	Ground
E6	C/BE1#	Command, Byte Enable 1
E7	SBO#	Snoop Backoff	1
E8	+5V	+5 VDC
E9	IRDY#	Initiator Ready	1
E10	AD17	Address 17
E11	GND	Ground
E12	AD23	Address 23
E13	C/BE3#	Command, Byte Enable 3
E14	GND	Ground
E15	AD30	Address 30
E16	GNT1	Grant 1
E17	+5V	+5 VDC
E18	GNT4	Grant 4
E19	X3	Reserved (3)
E20	GND	Ground
E21	INTC#	Interrupt C	1
E22	-12V	-12 VDC
E23	+12V	+12 VDC
E24	VBATT

1 = Pullup resistor of 2,7 kOhm on the System Slot (CPU).
2 = Pullup resistor of 330 ohm on the System Slot (CPU).
3 = Pullup resistor of 4,7 KB ohm, if not supported by the System Slot (CPU).

Module Bus Slot (Middle)

Pin	Name	Description	Note
A1	+3,3V	+3.3 VDC
A2	AD2	Address 2
A3	AD6	Address 6
A4	GND	Ground
A5	AD10	Address 10
A6	AD13	Address 13
A7	GND	Ground
A8	SDONE	Snoop Done	1
A9	GND	Ground
A10	FRAME#	Indicate Address or Data phase	1
A11	AD18	Address 18
A12	GND	Ground
A13	+5V	+5 VDC
A14	AD24	Address 24
A15	AD27	Address 27
A16	GND	Ground
A17	REQ2	Request 2	1
A18	CLKM
A19	CLK1	33 or 66 MHz Clock
A20	CLK2
A21	GND	Ground
A22	CLK3
A23	CLK4
A24	+3,3V	+3.3 VDC
B1	REQ64#	Request 64 ???	1
B2	AD3	Address 3
B3	+5V	+5 VDC
B4	AD8	Address 8
B5	+3,3V	+3.3 VDC
B6	AD14	Address 14
B7	PAR	Parity
B8	+3,3V	+3.3 VDC
B9	STOP#	Stop	1
B10	C/BE2#	Command, Byte Enable 2
B11	V(I/O)	+3.3 or +5 VDC
B12	AD21	Address 21
B13	+3,3V	+3.3 VDC
B14	V(I/O)	+3.3 or +5 VDC
B15	AD28	Address 28
B16	AD31	Address 31
B17	+3,3V	+3.3 VDC
B18	GNT3	Grant 3
B19	RST#	Reset
B20	NMI#	Non Maskable Interrupt
B21	X6	Reserved (6)
B22	+5V	+5 VDC	:
B23	RSTIN#
B24	USB+	Universal Serial Bus (USB)(+)
C1	ACK64#	Acknowledge 64 ???	1
C2	GND	Ground
C3	AD7	Address 7
C4	AD9	Address 9
C5	AD11	Address 11
C6	GND	Ground
C7	SERR#	System Error	1
C8	PERR#	Parity Error	1
C9	DEVSEL#	Device Select	1
C10	GND	Ground
C11	AD19	Address 19
C12	AD22	Address 22
C13	GND	Ground
C14	AD25	Address 25
C15	GND	Ground
C16	X1	Reserved (1)
C17	GNT2	Grant 2
C18	REQ4	Request 4	1
C19	SLEEP#/SDAT	Sleep/Serial Data (I2C)
C20	X4	Reserved (4)
C21	INTD#	Interrupt D	1
C22	INTB#	Interrupt B	1
C23	+5V	+5 VDC
C24	USB-	Universal Serial Bus (USB)(-)
D1	AD0	Address 0
D2	AD4	Address 4
D3	C/BE0#	Command, Byte Enable 0
D4	+3,3V	+3.3 VDC
D5	AD12	Address 12
D6	AD15	Address 15
D7	V(I/O)	+3.3 or +5 VDC
D8	LOCK#	Resource Lock	1
D9	TRDY#	Test Logic Ready	1
D10	AD16	Address 16
D11	AD20	Address 20
D12	+5V	+5 VDC
D13	+5V	+5 VDC
D14	AD26	Address 26
D15	AD29	Address 29
D16	REQ1	Request 1	1
D17	REQ3	Request 3	1
D18	V(I/O)	+3.3 or +5 VDC
D19	X2	Reserved (2)
D20	X5	Reserved (5)
D21	+3,3V	+3.3 VDC
D22	INTA#	Interrupt A	1
D23	ICPEN#/SCLK	ICPEN/Serial Clock (I2C)	3
D24	OSC (PWDN)
E1	AD1	Address 1
E2	AD5	Address 5
E3	GND	Ground
E4	M66EN	Enable 66Mhz PCI-bus
E5	GND	Ground
E6	C/BE1#	Command, Byte Enable 1
E7	SBO#	Snoop Backoff	1
E8	+5V	+5 VDC
E9	IRDY#	Initiator Ready	1
E10	AD17	Address 17
E11	GND	Ground
E12	AD23	Address 23
E13	C/BE3#	Command, Byte Enable 3
E14	GND	Ground
E15	AD30	Address 30
E16	GNT1	Grant 1
E17	+5V	+5 VDC
E18	GNT4	Grant 4
E19	X3	Reserved (3)
E20	GND	Ground
E21	INTC#	Interrupt C	1
E22	-12V	-12 VDC
E23	+12V	+12 VDC
E24	VBATT

1 = Pullup resistor of 2,7 kOhm on the System Slot (CPU).

Card Slot (Middle)

Pin	Name	Description	Note
A1	+3,3V	+3.3 VDC
A2	AD2	Address 2
A3	AD6	Address 6
A4	GND	Ground
A5	AD10	Address 10
A6	AD13	Address 13
A7	GND	Ground
A8	SDONE	Snoop Done	1
A9	GND	Ground
A10	FRAME#	Indicate Address or Data phase	1
A11	AD18	Address 18
A12	GND	Ground
A13	+5V	+5 VDC
A14	AD24	Address 24
A15	AD27	Address 27
A16	GND	Ground
A17	IDSEL0	IDSEL0	1
A18	GND	Ground
A19	CLK1	33 or 66 MHz Clock
A20	GND	Ground
A21	GND	Ground
A22	GND	Ground
A23	GND	Ground
A24	+3,3V	+3.3 VDC
B1	REQ64#	Request 64 ???	1
B2	AD3	Address 3
B3	+5V	+5 VDC
B4	AD8	Address 8
B5	+3,3V	+3.3 VDC
B6	AD14	Address 14
B7	PAR	Parity
B8	+3,3V	+3.3 VDC
B9	STOP#	Stop	1
B10	C/BE2#	Command, Byte Enable 2
B11	V(I/O)	+3.3 or +5 VDC
B12	AD21	Address 21
B13	+3,3V	+3.3 VDC
B14	V(I/O)	+3.3 or +5 VDC
B15	AD28	Address 28
B16	AD31	Address 31
B17	+3,3V	+3.3 VDC
B18	GND	Ground
B19	RST#	Reset
B20	NMI#	Non Maskable Interrupt
B21	X6	Reserved (6)
B22	+5V	+5 VDC	:
B23	RSTIN#
B24	USB+	Universal Serial Bus (USB)(+)
C1	ACK64#	Acknowledge 64 ???	1
C2	GND	Ground
C3	AD7	Address 7
C4	AD9	Address 9
C5	AD11	Address 11
C6	GND	Ground
C7	SERR#	System Error	1
C8	PERR#	Parity Error	1
C9	DEVSEL#	Device Select	1
C10	GND	Ground
C11	AD19	Address 19
C12	AD22	Address 22
C13	GND	Ground
C14	AD25	Address 25
C15	GND	Ground
C16	X1	Reserved (1)
C17	IDSEL1	Initialization Device Select 1
C18	GND	Ground
C19	SLEEP#/SDAT	Sleep/Serial Data (I2C)
C20	X4	Reserved (4)
C21	INTD#	Interrupt D	1
C22	INTB#	Interrupt B	1
C23	+5V	+5 VDC
C24	USB-	Universal Serial Bus (USB)(-)
D1	AD0	Address 0
D2	AD4	Address 4
D3	C/BE0#	Command, Byte Enable 0
D4	+3,3V	+3.3 VDC
D5	AD12	Address 12
D6	AD15	Address 15
D7	V(I/O)	+3.3 or +5 VDC
D8	LOCK#	Resource Lock	1
D9	TRDY#	Test Logic Ready	1
D10	AD16	Address 16
D11	AD20	Address 20
D12	+5V	+5 VDC
D13	+5V	+5 VDC
D14	AD26	Address 26
D15	AD29	Address 29
D16	REQ1	Request 1	1
D17	IDSEL2	Initialization Device Select 2
D18	V(I/O)	+3.3 or +5 VDC
D19	X2	Reserved (2)
D20	X5	Reserved (5)
D21	+3,3V	+3.3 VDC
D22	INTA#	Interrupt A	1
D23	ICPEN#/SCLK	ICPEN/Serial Clock (I2C)	3
D24	OSC (PWDN)
E1	AD1	Address 1
E2	AD5	Address 5
E3	GND	Ground
E4	M66EN	Enable 66Mhz PCI-bus
E5	GND	Ground
E6	C/BE1#	Command, Byte Enable 1
E7	SBO#	Snoop Backoff	1
E8	+5V	+5 VDC
E9	IRDY#	Initiator Ready	1
E10	AD17	Address 17
E11	GND	Ground
E12	AD23	Address 23
E13	C/BE3#	Command, Byte Enable 3
E14	GND	Ground
E15	AD30	Address 30
E16	GNT1	Grant 1
E17	+5V	+5 VDC
E18	GNT4	Grant 4
E19	X3	Reserved (3)
E20	GND	Ground
E21	INTC#	Interrupt C	1
E22	-12V	-12 VDC
E23	+12V	+12 VDC
E24	VBATT

1 = Pullup resistor of 2,7 kOhm on the System Slot (CPU).

64-bit PCI (Top)

Pin	Name	Description	Note
A1	GND	Ground
A2	X10	Reserved (10)
A3	AD35	Address 35	2
A4	AD38	Address 38	2
A5	AD42	Address 42	2
A6	V(I/O)	+3.3 or +5 VDC
A7	V(I/O)	+3.3 or +5 VDC
A8	AD52	Address 52	2
A9	AD56	Address 56	2
A10	AD60	Address 60	2
A11	AD63	Address 63	2
A12	GND	Ground
B1	X7	Reserved (7)
B2	GND	Ground
B3	AD36	Address 36	2
B4	AD39	Address 39	2
B5	AD43	Address 43	2
B6	AD46	Address 46	2
B7	AD49	Address 49	2
B8	AD53	Address 53	2
B9	AD57	Address 57	2
B10	AD61	Address 61	2
B11	GND	Ground
B12	C/BE6#	Command, Byte Enable 6	2
C1	X8	Reserved (8)
C2	AD32	Address 32	2
C3	GND	Ground
C4	AD40	Address 40	2
C5	AD44	Address 44	2
C6	GND	Ground
C7	GND	Ground
C8	AD54	Address 54	2
C9	AD58	Address 58	2
C10	GND	Ground
C11	PAR64	Parity 64 ???	2
C12	C/BE7#	Command, Byte Enable 7	2
D1	X9	Reserved (9)
D2	AD33	Address 33	2
D3	AD37	Address 37	2
D4	GND	Ground
D5	AD45	Address 45	2
D6	AD47	Address 47	2
D7	AD50	Address 50	2
D8	AD55	Address 55	2
D9	GND	Ground
D10	AD62	Address 62	2
D11	C/BE4#	Command, Byte Enable 4	2
D12	X11	Reserved (11)
E1	GND	Ground
E2	AD34	Address 34	2
E3	V(I/O)	+3.3 or +5 VDC
E4	AD41	Address 41	2
E5	GND	Ground
E6	AD48	Address 48	2
E7	AD51	Address 51	2
E8	GND	Ground
E9	AD59	Address 59	2
E10	V(I/O)	+3.3 or +5 VDC
E11	C/BE5#	Command, Byte Enable 5	2
E12	X12	Reserved (12)

2 = Pullup resistor of 2,7 kOhm (5V bus system) or 8,2 kOhm (3,3V bus system) on the backplane.

ISA96/AT96 (Bottom)

Pin	Name	Description	Note
A1	RSTDRV
A2	IRQ9	Interrupt 9
A3	SD11	Data 11
A4	SD9	Data 9
A5	IOCHRDY		1
A6	IOW#	I/O Write
A7	SA15	Address 15
A8	CLK	Clock
A9	SA10	Address 10
A10	SA7	Address 7
A11	T/C
A12	SA2	Address 2
B1	SD15	Data 15
B2	SD13	Data 13
B3	SD3	Data 3
B4	SD1	Data 1
B5	SMEMW#	System Memory Write
B6	SA18	Address 18
B7	SA14	Address 14
B8	DACK6#	DMA Acknowledge 6
B9	SA9	Address 9
B10	IRQ3	Interrupt 3
B11	IOCS16#	I/O 16-bit chip select	1
B12	SA1	Address 1
C1	SD7	Data 7
C2	SD5	Data 5
C3	SD10	Data 10
C4	SD8	Data 8
C5	AEN	Address Enable
C6	IOR#	I/O Read
C7	SA13	Address 13
C8	SA11	Address 11
C9	IRQ5	Interrupt 5
C10	SA6	Address 6
C11	SA4	Address 4
C12	IRQ11	Interrupt 11
D1	SD14	Data 14
D2	SD12	Data 12
D3	SD2	Data 2
D4	SD0	Data 0
D5	SMEMR#	System Memory Read
D6	SA17	Address 17
D7	REF#
D8	IRQ7	Interrupt 7
D9	SA8	Address 8
D10	MCS16#		1
D11	BALE
D12	SA0	Address 0
E1	SD6	Data 6
E2	SD4	Data 4
E3	0WS		1
E4	SBHE#
E5	SA19	Address 19
E6	SA16	Address 16
E7	SA12	Address 12
E8	DRQ6	DMA Request 6
E9	IRQ4	Interrupt 4
E10	SA5	Address 5
E11	SA3	Address 3
E12	IRQ10	Interrupt 10

1 = Pullup resistor must be integrated into the System Slot (CPU).

VMEbus (Bottom)

Pin	Name	Description
A1	D0	Data 0
A2	D2	Data 2
A3	D12	Data 12
A4	D7	Data 7
A5	DS1#
A6	BR3#
A7	AM1
A8	AM3
A9	IACKOUT#
A10	A14	Address 14
A11	A12	Address 12
A12	A10	Address 10
B1	BBSY#
B2	D10	Data 10
B3	D5	Data 5
B4	D15	Data 15
B5	SYSRES#
B6	A23	Address 23
B7	A21	Address 21
B8	A19	Address 19
B9	A16	Address 16
B10	A6	Address 6
B11	A4	Address 4
B12	A2	Address 2
C1	D8	Data 8
C2	D3	Data 3
C3	D13	Data 13
C4	SYSCLK
C5	DS0#
C6	DTACK#
C7	AS#
C8	IACK#
C9	AM4
C10	A13	Address 13
C11	A11	Address 11
C12	A9	Address 9
D1	D1	Data 1
D2	D11	Data 11
D3	D6	Data 6
D4	BG3OUT#
D5	WR#	Write
D6	AM0
D7	AM2
D8	A18	Address 18
D9	A15	Address 15
D10	A5	Address 5
D11	A3	Address 3
D12	A1	Address 1
E1	D9	Data 9
E2	D4	Data 4
E3	D14	Data 14
E4	BERR#	Bus Error
E5	AM5
E6	A22	Address 22
E7	A20	Address 20
E8	A17	Address 17
E9	A7	Address 7
E10	IRQ5#	Interrupt 5
E11	IRQ3#	Interrupt 3
E12	A8	Address 8

ECB (Bottom)

Pin	Name	Description
A1	D5	Data 5
A2	D2	Data 2
A3	A4	Data 4
A4	A7	Address 7
A5	BAI
A6	2F
A7	A10	Address 10
A8	INT#
A9	VCMOS
A10	PWRCLR#
A11	A13	Address 13
A12	RESET#	Reset
B1	D0	Data 0
B2	D4	Data 4
B3	A1	Address 1
B4	WAIT#
B5	A17	Address 17
B6	IEO
B7	n/c	Not connected
B8	DMARDY
B9	RD#	Read
B10	IORQ#
B11	?
B12	n/c	Not connected
C1	D6	Data 6
C2	A0	Address 0
C3	A5	Address 5
C4	A16	Address 16
C5	A18	Address 18
C6	BAO
C7	M1#
C8	WR#
C9	n
C10	A12	Address 12
C11	A9	Address 9
C12	n/c	Not connected
D1	D7	Data 7
D2	A2	Address 2
D3	A8	Address 8
D4	BUSRQ#
D5	A19	Address 19
D6	A11	Address 11
D7	NMI#	Non Maskable Interrupt
D8	PF
D9	HALT#
D10	RFSH#
D11	MRQ#
D12	n/c	Not connected
E1	D3	Data 3
E2	A3	Address 3
E3	A6	Address 6
E4	IEI
E5	D1	Data 1
E6	A14	Address 14
E7	n/c	Not connected
E8	n/c	Not connected
E9	DESLCT#
E10	A15	Address 15
E11	BUSAK#
E12	n/c	Not connected

SMP16 (Bottom)

Pin	Name	Description
A1	NMI#	Non Maskable Interrupt
A2	IRQ0#	Interrupt 0
A3	D11	Data 11
A4	D9	Data 9
A5	RDYIN
A6	IOW#
A7	A15	Address 15
A8	CLK
A9	A10	Address 10
A10	A7	Address 7
A11	TC/EOP#
A12	A2	Address 2
B1	D15	Data 15
B2	D13	Data 13
B3	D3	Data 3
B4	D1	Data 1
B5	MEMW#
B6	A18	Address 18
B7	A14	Address 14
B8	DACKx#
B9	A9	Address 9
B10	IRQ3#	Interrupt 3
B11	IOCS16#
B12	A1	Address 1
C1	D7	Data 7
C2	D5	Data 5
C3	D10	Data 10
C4	D8	Data 8
C5	BUSEN
C6	IOR#
C7	A13	Address 13
C8	A11	Address 11
C9	IRQ1#	Interrupt 1
C10	A6	Address 6
C11	A4	Address 4
C12	IRQ4#	Interrupt 4
D1	D14	Data 14
D2	D12	Data 12
D3	D2	Data 2
D4	D0	Data 0
D5	MEMR#
D6	A17	Address 17
D7	INTA#
D8	INT#
D9	A8	Address 8
D10	MECS16#
D11	ALE
D12	A0	Address 0
E1	D6	Data 6
E2	D4	Data 4
E3	MMIO#
E4	BHEN
E5	A19	Address 19
E6	A16	Address 16
E7	A12	Address 12
E8	DRQx#
E9	IRQ2#	Interrupt 2
E10	A5	Address 5
E11	A3	Address 3
E12	IRQ5#	Interrupt 5

Floppy/EIDE (Bottom)

Pin	Name	Description
A1	FDSEL1	Floppy Select 1
A2	FDSEL0	Floppy Select 0
A3	FDME1	Floppy ?
A4	DIR	Floppy Direction
A5	STEP	Floppy Step
A6	WRDATA	Floppy Write Data
A7	WE	Floppy Write?
A8	TRK0	Floppy Track 0
A9	WP	Floppy Write?
A10	RDDATA	Floppy ?
A11	HDSEL	Floppy HD Select
A12	DSKCHG	Floppy DiskChange
B1	DRVDEN1	?
B2	DRVDEN0	?
B3	IDECS3P#	IDE ?
B4	IDEA2	IDE ?
B5	IDEIRQS	IDE ?
B6	IDEPUS	IDE ?
B7	IDEDRQP	IDE ?
B8	IDED14	IDE Data 14
B9	IDED8	IDE Data 8
B10	IDED6	IDE Data 6
B11	IDED11	IDE Data 11
B12	IDED3	IDE Data 3
C1	FDME0	Floppy Me?
C2	INDX	Floppy Index
C3	IDECS3S#	IDE ?
C4	IDEA0	IDE ?
C5	IDEDAKS#	IDE ?
C6	IDEIOR#	IDE ?
C7	IDEDRQS	IDE ?
C8	IDED1	IDE Data 1
C9	#IDERST	IDE ?
C10	IDED10	IDE Data 10
C11	IDED4	IDE Data 4
C12	IDED2	IDE Data 2
D1	IDELEDS#	IDE LED ?
D2	IDELEDP#	IDE LED ?
D3	IDECS1S#	IDE ?
D4	IDEIRQP	IDE ?
D5	IDEPUP	IDE Pull Up ?
D6	IDEIOW#	IDE ?
D7	IDED15	IDE Data 15
D8	IDED13	IDE Data 13
D9	IDED7	IDE Data 7
D10	GND	Ground
D11	GND	Ground
D12	GND	Ground
E1	GND	Ground
E2	GND	Ground
E3	IDECS1P#	IDE ?
E4	IDEA1	IDE ?
E5	IDEDAKP#	IDE ?
E6	IDEIORDY	IDE ?
E7	IDED0	IDE Data 0
E8	IDED12	IDE Data 12
E9	IDED9	IDE Data 9
E10	IDED5	IDE Data 5
E11	GND	Ground
E12	GND	Ground

SCSI (Bottom)

Pin	Name	Description
A1	TERM
A2	GND	Ground
A3	I/O#
A4	REQ#
A5	ATN#
A6	D8	Data 8
A7	D9	Data 9
A8	D10	Data 10
A9	D2	Data 2
A10	D4	Data 4
A11	DP0
A12	GND	Ground
B1	TERM
B2	GND	Ground
B3	GND	Ground
B4	GND	Ground
B5	GND	Ground
B6	GND	Ground
B7	GND	Ground
B8	GND	Ground
B9	GND	Ground
B10	GND	Ground
B11	GND	Ground
B12	GND	Ground
C1	TERM
C2	GND	Ground
C3	C/D#
C4	MSG#
C5	ACK#
C6	D12	Data 12
C7	DP1	Data P1
C8	D13	Data 13
C9	D1	Data 1
C10	D5	Data 5
C11	D7	Data 7
C12	GND	Ground
D1	TERM
D2	GND	Ground
D3	GND	Ground
D4	GND	Ground
D5	GND	Ground
D6	GND	Ground
D7	GND	Ground
D8	GND	Ground
D9	GND	Ground
D10	GND	Ground
D11	GND	Ground
D12	GND	Ground
E1	TERM
E2	GND	Ground
E3	SEL#
E4	RST#
E5	BSY#
E6	D14	Data 14
E7	D15	Data 15
E8	D11	Data 11
E9	D0	Data 0
E10	D3	Data 3
E11	D6	Data 6
E12	GND	Ground